春节快乐！
我们将在 2 月 1 日至 8 日期间休假，并将于2 月 9 日恢复办公。
Reinforced 4-Edge Chamfering Cutter nACo3 Coating
DMGX4-10120
单件价格
MXN 2,063.00
/pc
批量折扣
数量
折扣
单价
1
0%
MXN 2,063.00
选项
Por Favor Eliga el Tipo Por Favor Eliga el Tipo
总费用
MXN 2,063.00
数量
/pc
1
春节快乐！
我们将在 2 月 1 日至 8 日期间休假，并将于2 月 9 日恢复办公。
Reinforced 4-Edge Chamfering Cutter nACo3 Coating
DMGX4-10120
单件价格
MXN 2,063.00
/pc
批量折扣
数量
折扣
单价
1
0%
MXN 2,063.00
选项
Por Favor Eliga el Tipo Por Favor Eliga el Tipo
总费用
MXN 2,063.00
数量
/pc
1
Reinforced Stainless Steel 4-Edge Chamfering Cutter nACo Coating
4-Edge chamfering cutter DPGX4 series is suitable for chamfering alloy steel, Die steel, Pre hardened steel and other materials below HRC50 degrees.
It has higher accuracy and service life than the general model.
Material: Cemented Carbide(Tungsten Steel)
Coating: nACo
Remark: Please Choose the Model when ordering.
| Model | CED(mm) | ANGLE | SHK(mm) | OVL(mm) |
| DMGX4-360 | 3 | 60° | 3 | 50 |
| DMGX4-390 | 3 | 90° | 3 | 50 |
| DMGX4-3120 | 3 | 120° | 3 | 50 |
| DMGX4-460 | 4 | 60° | 4 | 50 |
| DMGX4-490 | 4 | 90° | 4 | 50 |
| DMGX4-4120 | 4 | 120° | 4 | 50 |
| DMGX4-560 | 5 | 60° | 5 | 50 |
| DMGX4-590 | 5 | 90° | 5 | 50 |
| DMGX4-5120 | 5 | 120° | 5 | 50 |
| DMGX4-600 | 6 | 60° | 6 | 50 |
| DMGX4-690 | 6 | 90° | 6 | 50 |
| DMGX4-6120 | 6 | 120° | 6 | 50 |
| DMGX4-860 | 8 | 60° | 8 | 60 |
| DMGX4-890 | 8 | 90° | 8 | 60 |
| DMGX4-8120 | 8 | 120° | 8 | 60 |
| DMGX4-1060 | 10 | 60° | 10 | 75 |
| DMGX4-1090 | 10 | 90° | 10 | 75 |
| DMGX4-10120 | 10 | 120° | 10 | 75 |
| DMGX4-1260 | 12 | 60° | 12 | 75 |
| DMGX4-1290 | 12 | 90° | 12 | 75 |
| DMGX4-12120 | 12 | 120° | 12 | 75 |