Name: Polar 1880A 1.8m 1H i3200 Printheads
SKU: LEGACY-MX-38176
Price: 70000.00 MXN
Availability: OutOfStock

Happy Chinese New Year!

Our office will be closed Feb 1–8 and will reopen on Feb 9.

Home

Equipment

Flatbed Printer and Supplies

Large Format Printers

Polar 1880A 1.8m 1H i3200 Printheads

Item #: SIT-POLAR-1880A

Out of stock

Polar 1880A 1.8m 1H i3200 Printheads

i3200E

Unit cost

MXN 74,000.00

/set

Wholesale discounts

Quantity

Discount

Price per unit

MXN 74,000.00

Options

Por Favor Eliga el Tipo Por Favor Eliga el Tipo

Total Cost

MXN 74,000.00

Amount

/set

Product Details

Description

Printhead		XP600	DX7	DX5	i1600A1/E1	i3200A1/E1
Printspeed	3 pass	-	-	-	15m²/h	30m²/h
	4 pass	10m²/h	12m²/h	12m²/h	10m²/h	20m²/h
	6 pass	7m²/h	8m²/h	8m²/h	7.5m²/h	15m²/h

Especificaciones：

Modelo		1880A
Cabezal
1800mm
Prinhead		xp600	DX7	DX5	i1600A1/E1	i3200A1/E1
3 pasadas	-	-	-	15m²/h	30m²/h
4 pasadas	10m²/h	12m²/h	12m²/h	10m²/h	20m²/h
6 pasadas	7m²/h	8m²/h	8m²/h	7.5m²/h	15m²/h
Tinta	Tipo
	Capacidad	4 Colores, 220ml cada una
Media	Grosor	1.5mm a 8mm ajustable
	Maximo peso del rollo	75KG
	Tipo
Pre calentador y post calentador (puede ser controlado por separado)
Recolector de material
Sistema de secado		Sistema de secado
Interface		USB 2.0(480m/s)
Software RIP		MaintopV5.3、Photoprint、Seeget、Torpaz、Wasatch、Onyx
AC 110V±10%、AC220V±10%、50/60±1Hz
Ambiente operacional		Temperatura: 20°C~35°C; Humedd: 35%RH~65%RH
600W
L2837mmW455mmH1300mm
L2870mmW820mmH500mm
Peso Neto		125KG
Peso		185KG

arjeta Madre

Tarjeta Senyang
Control de Temperatura

Temperatura fija, sin posibilidad de ajuste.
Sistema de Rebobinado (Media Take-up Device)

Dispositivo de baja velocidad de 24V.
Sistema de Secado

Ventilador de secado de 150W.

Motor paso a paso.	Servomotor de alta velocidad.
Tanque Principal de Tinta

Capacidad baja de almacenamiento en cartuchos y suministro de tinta inestable.

Install the tripod:

Component Names:
1.Main Body
2.Paper Feeding System
3.Dryer
4.Iron Legs
5.Crossbeam
6.Support Fixing Plate
7.Leg Frame
8.Paper Collecting System

Leg Frame Installation:
1.Install the left and right base feet at the bottom ends of the left and right iron legs, and secure them using 8 inner hex bolts (M5×10). Attach the casters with brakes to the left and right base feet using 16 inner hex bolts (M5×10).
Note: Tighten in the direction of the arrow, as shown in the diagram.

2.Install the tie rods and crossbeam between them and secure with 22 inner hex bolts (M5×10), as shown in the diagram.

3.Fix the support fixing plate to the left and right iron legs and the left and right base feet using 6 inner hex bolts (M5×10).

Then, secure both ends of the support fixing plate using 4 inner hex bolts (M6×25).

Place the assembled paper collection motor module and the paper collecting module onto the aluminum tube.

Then secure them using 2 straight-knurled handles (M5×25) to the left and right support parts, as shown in the diagram.

4.Attach the fan support components to the left and right iron legs using 8 inner hex bolts (M5×10).

Then fix the assembled dryer onto the support using 8 inner hex bolts (M4×10), as shown in the diagram.

5.Fix the support fixing plate to the left and right iron legs and the base feet using 6 inner hex bolts (M5×10).

Then secure both ends of the support fixing plate using 4 inner hex bolts (M6×25).

Place the assembled paper feeding module onto the aluminum tube.

Then secure it using 2 straight-knurled handles (M5×25) to the left and right support parts, as shown in the diagram.

6.After completing the steps above, mount the main body onto the leg frame. Align the circular holes and secure using 4 inner hex bolts (M5×10) (tighten in the direction shown by the arrow), as shown in the diagram.

For all the outdoor advertising prints on light box,bill board,high way,vehicle,buildings.