Soluciones hechas para el negocio de la publicidad.
P-5000 Acrylic Shadowless Adhesive for Channel Letter
Unit cost
MXN 240.84
/pc
Wholesale discounts
Quantity
Discount
Price per unit
1+
0%
MXN 240.84
Total Cost
MXN 240.84
Amount
/pc
1
Soluciones hechas para el negocio de la publicidad.
Unit cost
MXN 240.84
/pc
Wholesale discounts
Quantity
Discount
Price per unit
1+
0%
MXN 240.84
Total Cost
MXN 240.84
Amount
/pc
1
Features
1. Strong adhesion;
2. Curing high toughness;
3. Wide range of applicable materials;
4. Strong impact resistance;
5. High environmental protection;
6. High and low temperature resistance.
Specifications
Product specification: 300ml
Model: P-5000
Package: 24pcs/pack
Glue color: Transparent
Clamping time: surface dry 25-35 minutes, fully dry 36-48 hours
Product Name: Acrylic Special Structural Adhesive
Operating time: 4-7 minutes
Adhesive strength: 80%
Shelf life: The shelf life of unopened products is 12 months
Application range: sign structure installation, sign board luminous liner bonding, sign body sealing, acrylic sign,
Metal three-dimensional characters installation background wall, shop signboard
Instructions
Soft glue gun construction method
1. Cut the nozzle
2. Press and hold the iron piece, and pull the push rod backward
3. Open the screw cap
4. Cut open the package and put in the structural glue
5. Screw on the screw cap
6. Start construction
MATTERS NEEDING ATTENTION
1. Please ensure that the surface of the bonded object is clean and dry, without any pollutants, such as: dirt, oil stains, lubricating oil and rust.
2. Take the product out of the refrigerated environment and allow the adhesive to reach room temperature before use. The best use temperature should be between 18-32 degrees.
3. After the operation is completed, the unused glue should be tightened immediately and sealed for storage. When using it again, if there is a little crust on the seal, just remove it, and it will not affect the normal use.
4. Avoid contact with eyes, skin and clothing. After skin contact, please wash it with soapy water immediately. If it accidentally splashes into your eyes, please rinse it with plenty of water immediately. If you still feel unwell, you must go to the hospital for examination.
5. If you need to use a dispensing machine to apply glue, it is recommended to soak the dispensing needle in a container containing silicone oil when the operation is over or interrupted to prevent curing and clogging the needle, and remove a small amount of glue in the needle when working again.
